![\"WOSP_8deg_Traverse_1\"](\"http:\/\/wtheiss.com\/wordpress\/wp-content\/uploads\/2016\/09\/WOSP_8deg_Traverse_1.png\")
<\/a><\/p>\nThe spectrometer units (including light sources and electronics) are mounted on 2 vertical rail systems (made by ITEM). The rail systems are mechanically synchronized and driven by a Trinamic stepper motor.<\/p>\n The measuring heads can be positioned at any location on the glass as well as several calibration positions below the glass.<\/p>\n The whole system fits in a container of 400 mm width and 1000 mm length. This was a requirement of our customer. The open slit in the middle provides enough space for the glass (more than 2500 mm) to move through the system:<\/p>\n The spectrometers as well as the stepper motor are controlled by our CODE software. CODE scripts are used to execute actions like calibration and automatic scans. Measurements can be triggered by an OPC connection \u2013 in this case CODE provides an OPC client.<\/p>\n Light source and measuring heads for transmission and reflection, mounted on the rail system:<\/p>\n System opened, showing one measuring head with electronics and the energy chain for power supply and ethernet connection:<\/p>\n Typical spectra of high quality:<\/p>\n The measured spectra show excellent agreement with those measured by a laboratory research instrument\u00a0in the range 380 \u2026 950 nm):<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n